Thanks for printing!  Don't forget to come back to ENERCON for new articles and information.

Major Services

ZEVAC® (Zero Emission Vacuum and Compressor) the smart alternative to venting and flaring

  1. As federal, state, and local regulatory agencies further develop the Clean Air Act and other emission standards and permitting requirements, there is a solution that provides Zero Venting, Zero Flaring, Zero Emissions and is the Environmentally Responsible way to handle natural gas in your pipeline. 

  2. ZEVAC® units use compressed air to suction your process vessel or pipeline segment and compresses the gas into the adjacent pipeline.  ZEVAC® keeps the gas inside the pressurized system.  

  3. ENERCON is the sole authorized distributor of the ZEVAC® system for the Oil & Gas industry.

    1. Eliminates the need for flare permits
    2. Eliminates the need for notification to the public
    3. Eliminates emissions
    4. Capability to drawdown the vessel or pipe to 0 psi
    5. Recompress product into an adjacent vessel

Pipeline Services

  1. Survey Inspection
  2. Above Ground Marker (AGM) Locations
  3. GIS / Sub-Meter Mapping
  4. Launching/Receiving of ILI Tools
  5. Lifting Services
  6. ILI Tool Tracking and Locating
  7. Leak Detection and General Right of Way inspection
  8. Survey and Anomaly locating of excavation sites
  9. Engineered As-Built Documentation
  10. Hydrostatic Testing Survey
  11. Depth of Cover Survey
  12. NORM Survey and Tool Decontamination

Transaction Due Diligence

  1. Perform Due Diligence Appraisals of oil and gas leases prior to acquisition or divesting activity
  2. Desktop Reviews for Wetlands and other Waters of the US
  3. Wetland Delineations for pre-drilling environmental audits
  4. Wetland Delineations for routing of temporary water lines and gas lines
  5. Desktop Reviews for Threatened and Endangered species
  6. Critical Habitat Surveys for species of special concern
  7. Environmental, Cultural and Demographic studies for pipeline corridors
  8. Pre- and Post-drilling identification of water sources and water sampling
  9. Phase I Environmental Site Assessments (ESAs) pursuant to ASTM methods
  10. Phase II ESAs to determine the presence or absence of contamination on a site

Air Permitting and Compliance

  1. EPA and state specific Air Permitting
  2. LDAR for Leak Detection and Quantification

Engineering Services for Oil & Gas

  1. Natural Gas Power Plant modifications
  2. Pipe Stress Analysis
  3. Pipeline design
  4. Compression
  5. Metering and Regulation
  6. Gas Dehydration Trains
  7. Gas Fired Turbine Performance Testing
  8. Safety System Packages and SAFE Charts
  9. Piping & Instrumentation Diagrams
  10. Process Flow Diagrams
  11. Structural, Mechanical, Electrical Engineering
  12. Erosion and Sedimentation Control Plans

  13. See our full suite of Engineering Services

Surveying and Mapping

  1. Conventional Surveying - ROW, Construction, As-Built, Topography, Boundary
  2. 3D Laser Scanning
  3. Well Site Platting
  4. Water Purveying services
  5. LiDAR
  6. Aerial Mapping
  7. Digital Ortho-photogrammetry
  8. Bathymetric
  9. 3D Utility Location/GPR/SUE

Other Environmental Services

  1. Environmental Permitting including individual State permits and joint permits with States and US Army Corps of Engineers
  2. Naturally Occurring Radioactive Material (NORM) Services
  3. Remediation of properties impacted by releases of regulated materials
  4. Spill Prevention, Containment and Countermeasure (SPCC) plans
  5. Storm Water Pollution Prevention Plans (SWPPP)
  6. Tier II Reporting

  7. See our full suite of Environmental Services